About Me

Prof. Zheng Li specializes in the area of sustainable materials and structures, including modern timber structures and steel wind turbine structures. Specifically, he is working on the development of earthquake resistant / resilient structures and performance based design and reliability analysis. He is currently a professor on the faculty at Tongji University in the College of Civil Engineering. Prof. Li has received the Excellent Young Scientists Fund awarded by the National Natural Science Foundation of China (NSFC). He serves as the Principal Investigator (PI) for three projects granted by the National Natural Science Foundation of China. Prof. Li is the author of five books and 150 technical publications (as the first or corresponding author for about 100 papers in well reputed international peer reviewed journals).

Last updated on Jan, 2023

Education

Employment

Research interests

Research Projects

Research

  1. National Natural Science Foundation of China, “Steel and timber hybrid structures”, 2023.01 - 2025.12, PI.
  2. National Natural Science Foundation of China, “Seismic behavior and time-dependent characteristic of self-centering timber frame structures based on post-tensioning with energy dissipation technology”, 2019.01 - 2022.12, PI.
  3. National Natural Science Foundation of China, “Mechanical behavior and design method of self-centering post-tensioned glulam beam to column joints”, 2017.01 - 2019.12, PI.
  4. National Key Research and Development Program supported by Ministry of Science and Technology of China, “Development of multi-story timber and timber hybrid structural systems”, 2017.07 - 2020.12, PI.
  5. Shanghai Sailing Program supported by Shanghai Science and Technology Committee, “Mechanical behavior and failure mechanism of self-centering timber-steel hybrid lateral load resisting systems”, 2016.05 - 2019.05, PI.
  6. Chenguang Scholar Program supported by Shanghai Education Development Foundation and Shanghai Municipal Education Commission, “Working mechanism of self-centering glulam beam-to-column connections with supplemental frictional type energy dissipating devices”, 2017.01 - 2019.12, PI.
  7. Civil Engineering Research Fund supported by Tongji University, “Investigation of life-cycle performance and design methodology for post-tensioned timber connections using machine learning technique”, 2017.09 - 2019.08, PI.
  8. Fundamental Research Funds for the Central Universities of China, “Seismic performance of multi-story timber-steel hybrid structural system with supplemental friction dampers”, 2016.01 - 2018.12, PI.
  9. Civil Engineering Research Fund supported by Tongji University, “Long term behavior of timber structures and life-cycle performance and design methodology”, 2018.05 - 2020.05, PI.
  10. National Natural Science Foundation of China, “Seismic behavior and reliability assessment of post-tensioned cross laminated timber shear wall structures”, 2018.01 - 2021.12, Prof. Minjuan HE as PI.
  11. National Natural Science Foundation of China, “Seismic performance and design method of multi-story timber-steel hybrid structures”, 2014.01 - 2017.12, Prof. Minjuan HE as PI.
  12. National Key Research and Development Program supported by Ministry of Science and Technology of China, “Development of standard system for timber structures”, 2016.07 - 2019.12, Prof. Minjuan HE as PI.
  13. Civil Engineering International Collaborative Research Fund supported by Tongji University, “Structural optimization and seismic performance of multi-story timber-steel hybrid structures”, 2016.01 - 2018.12, Prof. Minjuan HE as PI. of Tongji University, and Prof. Constantin CHRISTOPOULOS as PI. of University of Toronto
  14. New Zealand Earthquake Commission (EQC) Biennial Contestable Grants Programme, “Seismic design of timber-steel hybrid shear wall systems for mid-rise light timber framed buildings”, 2016.07 - 2018.6, Dr. Minghao LI as PI.

Publications

NOTE: * represents corresponding author.

Journal papers

  1. Zheng Li*, Fei Chen, Minjuan He, Ruirui Zhou, Ye Cui, Yongliang Sun, Guirong He. Lateral performance of self-centering steel-timber hybrid shear walls with slip friction dampers: experimental investigation and numerical simulation [J]. Journal of Structural Engineering ASCE, DOI: 10.1061/(ASCE)ST.1943-541X.0002850. (SCI)
  2. Zheng Li, Jing Luo, Minjuan He*, Guirong He, Yongliang Sun. Analytical prediction of the fire resistance of the glulam bolted connections under coupled moment and shear [J]. Journal of Building Engineering, 2021, 33, 101531. (SCI)
  3. Zheng Li, Xiuzhi Zheng, Chun Ni, Duo Tao, Minjuan He*. Reliability-based investigation into the duration of load effect for the design of timber structures based on Chinese standard [J]. Structural Safety, 2020, 87, 102001. (SCI)
  4. Zhan Shu, Zheng Li*, Minjuan He, Fei Chen, Chao Hu, Feng Liang. Bolted joints for small and medium reticulated timber domes: experimental study, numerical simulation, and design strength estimation [J]. Archives of Civil and Mechanical Engineering, 2020, 20, 73. (SCI)
  5. Minjuan He, Xiaofeng Sun, Zheng Li*, Wei Feng. Bending, shear, and compressive properties of three- and five-layer cross-laminated timber fabricated with black spruce [J]. Journal of Wood Science, 2020, 66, 38. (SCI)
  6. Zheng Li, Xiuzhi Zheng, Minjuan He*, Yongliang Sun, Guirong He. Experimental and analytical investigations into the time-dependent performance in post-tensioned timber beam-column joints under sustained loads and varied environment [J]. Construction and Building Materials, 2020, 251, 118943. (SCI)
  7. Xiaofeng Sun, Minjuan He, Zheng Li*. Experimental and analytical lateral performance of posttensioned CLT shear walls and conventional CLT shear walls [J]. Journal of Structural Engineering ASCE, 2020, 146(6), 04020091. (SCI)
  8. Peng Qi, Mengwei Li, Xiuzhi Zheng, Zheng Li*, Chuang Liu, Xin Zeng, Duo Tao, Xiaoya Qi, Zhong Ma, Minjuan He. Machine learning based modelling for the duration of load effect in wood structural members under long-term sustained load [J]. IEEE Access, 2020, 8(1), 17903-17915. (SCI)
  9. Xiaofeng Sun, Minjuan He, Zheng Li*. Novel engineered wood and bamboo composites for structural applications: state-of-art of manufacturing technology and mechanical performance evaluation [J]. Construction and Building Materials, 2020, 249, 118751. (SCI)
  10. Minjuan He, Jing Luo, Duo Tao, Zheng Li*, Yongliang Sun, Guirong He. Rotational behavior of bolted glulam beam-to-column connections with knee brace [J]. Engineering Structures, 2020, 207, 110251. (SCI)
  11. Xiaofeng Sun, Minjuan He, Zheng Li*, Frank Lam. Seismic performance of energy-dissipating post-tensioned CLT shear wall structures I: shear wall modeling and design procedure [J]. Soil Dynamics and Earthquake Engineering, 2020, 131, 106022. (SCI)
  12. Xiaofeng Sun, Minjuan He, Zheng Li*, Frank Lam. Seismic performance of energy-dissipating post-tensioned CLT shear wall structures II: structural design method and dissipater comparison [J]. Soil Dynamics and Earthquake Engineering, 2020, 130, 105980. (SCI)
  13. Suyi Guo, Minjuan He, Zheng Li*, Feng Liang, Fei Chen, Yongliang Sun, Bruno Briseghella, Guirong He. Lateral performance of midply wood shear walls with anchor tie-down system: experimental investigation and numerical simulation [J]. Construction and Building Materials, 2020, 235, 117518. (SCI)
  14. Zheng Li, Xijun Wang, Minjuan He*, Wenchen Dong, Hanlin Dong. Seismic performance of timber-steel hybrid structures I: subassembly testing and numerical modeling [J]. Journal of Structural Engineering ASCE, 2019, 144(10), 04019113. (SCI)
  15. Zheng Li, Xijun Wang, Minjuan He*, Hanlin Dong. Seismic performance of timber-steel hybrid structures II: calibration of performance objectives and design method [J]. Journal of Structural Engineering ASCE, 2019, 144(10), 04019114. (SCI)
  16. Xiaofeng Sun, Minjuan He, Zheng Li*, Frank Lam. Seismic performance assessment of conventional CLT shear wall structures and post-tensioned CLT shear wall structures [J]. Engineering Structures, 2019, 196, 109285. (SCI)
  17. Zheng Li, Duo Tao, Zhan Shu, Mengwei Li, Songshi Jing, Minjuan He, Peng Qi*. Prediction of damage accumulation effect of wood structural members under long-term service: a machine learning approach [J]. Materials, 2019, 12(8), 1243. (SCI)
  18. Zhan Shu, Zheng Li*, Xiangsheng Yu, Jing Zhang, Minjuan He. Rotational performance of glulam dowel type bolted joints: experimental investigation and analytical approach [J]. Construction and Building Materials, 2019, 213, 675-695. (SCI)
  19. Zheng Li*, Ruirui Zhou, Minjuan He, Xiaofeng Sun. Modern timber construction technology and engineering applications in China [J]. Proceedings of the Institution of Civil Engineers - Civil Engineering, 2019, 172(5), 17-27. (SCI)
  20. Zhan Shu, Zheng Li*, Minjuan He, Xiuzhi Zheng, Tingting Wu. Seismic design and performance evaluation of self-centering timber moment resisting frames [J]. Soil Dynamics and Earthquake Engineering, 2019, 119, 346-357. (SCI)
  21. Zheng Li*, Minjuan He, Hanlin Dong, Zhan Shu, Xijun Wang. Friction performance assessment of non-asbestos organic (NAO) composite-to-steel interface and polytetrafluoroethylene (PTFE) composite-to-steel interface: experimental evaluation and application in seismic resistant structures [J]. Construction and Building Materials, 2018, 174, 272-283. (SCI)
  22. Minjuan He, Qi Luo, Zheng Li*, Hanlin Dong, Minghao Li. Seismic performance evaluation of timber-steel hybrid structure through large-scale shaking table tests [J]. Engineering Structures, 2018, 175, 483-500. (SCI)
  23. Minjuan He, Xiaofeng Sun, Zheng Li*. Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlock [J]. Construction and Building Materials, 2018, 185, 175-183. (SCI)
  24. Zheng Li*, Minjuan He, Kangli Wang. Hysteretic performance of self-centering glulam beam-to-column connections [J]. Journal of Structural Engineering, ASCE, 2018, 144(5), 04018031. (SCI)
  25. Jing Zhang, Minjuan He, Zheng Li*. Mechanical performance assessment of bolted glulam joints with local cracks [J]. Journal of Materials in Civil Engineering, ASCE, 2018, 30(6), 04018094. (SCI)
  26. Jing Zhang, Minjuan He, Zheng Li*. Numerical analysis on tensile performance of bolted glulam joints with initial local cracks [J]. Journal of Wood Science, 2018, 64(4), 364-376. (SCI)
  27. Zheng Li*, Minjuan He, Xijun Wang, Minghao Li. Seismic performance assessment of steel frame infilled with prefabricated wood shear walls [J]. Journal of Constructional Steel Research, 2018, 140, 62-73. (SCI)
  28. Xiaofeng Sun, Minjuan He, Zheng Li*, Zhan Shu. Performance evaluation of multi-storey cross-laminated timber structures under different earthquake hazard levels [J]. Journal of Wood Science, 2018, 64(1), 23-39. (SCI)
  29. Zhan Shu, Minjuan He, Zheng Li*. Estimating inelastic drift demands for wood portal frame systems considering accumulated damages [J]. Structural Design of Tall and Special Buildings, 2018, 27(3), e1440. (SCI)
  30. Zheng Li, Hanlin Dong, Xijun Wang, Minjuan He*. Experimental and numerical investigations into seismic performance of timber-steel hybrid structure with supplemental dampers [J]. Engineering Structures, 2017, 151, 33-43. (SCI)
  31. Zheng Li*, Minjuan He, Frank Lam, Ruirui Zhou, Minghao Li. Seismic reliability evaluation of steel-timber hybrid shear wall systems [J]. Earthquakes and Structures, 2017, 13(3), 289-297. (SCI)
  32. Minjuan He, Jing Zhang, Zheng Li*. Influence of cracks on the mechanical performance of dowel type glulam bolted joints [J]. Construction and Building Materials, 2017, 153, 445-458. (SCI)
  33. Zheng Li*, Minjuan He, Zhong Ma, Kangli Wang, Renle Ma. In-plane behavior of timber-steel hybrid floor diaphragms: experimental testing and numerical simulation [J]. Journal of Structural Engineering, ASCE, 2016, 142(12), 04016119. (SCI)
  34. Zheng Li, Minjuan He*, Duo Tao, Maolin Li. Experimental buckling performance of scrimber composite columns under axial compression [J]. Composites Part B: Engineering, 2016, 86, 203-213. (SCI)
  35. Minjuan He, Jing Zhang, Zheng Li*, Maolin Li. Production and mechanical performance of scrimber composite manufactured from poplar wood for structural applications [J]. Journal of Wood Science, 2016, 62(5), 429-440. (SCI)
  36. Minjuan He, Duo Tao, Zheng Li*, Maolin Li. Mechanical behavior of dowel-type joints made of wood scrimber composite [J]. Materials, 2016, 9(7), 581, 1-16. (SCI)
  37. Minjuan He, Zheng Li*, Yongliang Sun, Renle Ma. Experimental investigations on mechanical properties and column buckling behavior of structural bamboo [J]. Structural Design of Tall and Special Buildings, 2015, 24(7), 491-503. (SCI)
  38. Minjuan He, Zheng Li*, Renle Ma, Dongping Huang, Kai Liu, Zhoutao Pei. Experimental investigation and on-site measurement for reverse-balanced flange connections in wind turbine towers [J]. Advances in Structural Engineering, 2015, 18(8), 1215-1225. (SCI)
  39. Zheng Li*, Minjuan He, Frank Lam, Minghao Li. Load-sharing mechanism in timber-steel hybrid shear wall systems [J]. Frontiers of Structural and Civil Engineering. 2015, 9(2), 203-214. (SCI)
  40. Minjuan He, Zheng Li*, Frank Lam, Renle Ma, Zhong Ma. Experimental investigation on lateral performance of timber-steel hybrid shear wall systems [J]. Journal of Structural Engineering, ASCE, 2014, 140(6), 04014029. (SCI)
  41. Zheng Li*, Minjuan He, Minghao Li, Frank Lam. Damage assessment and performance-based seismic design of timber-steel hybrid shear wall systems [J]. Earthquakes and Structures, 2014, 7(1), 101-117. (SCI)
  42. Zheng Li*, Minjuan He, Frank Lam, Minghao Li, Renle Ma, Zhong Ma. Finite element modeling and parametric analysis of timber-steel hybrid structures [J]. Structural Design of Tall and Special Buildings, 2014, 23(14), 1045-1063. (SCI)
  43. Minjuan He, Zheng Li*, Renle Ma, Feng Liang. Experimental and numerical investigations on seismic performance of a super tall steel tower. Earthquakes and Structures, 2014, 7(4), 571-586. (SCI)
  44. 李征*, 陈飞, 董翰林, 何敏娟, 李明浩. 往复荷载下带摩擦型阻尼器钢木混合剪力墙抗侧力性能研究[J], 建筑结构学报, 2020, 41(10), 1-10. (EI)
  45. 孙晓峰, 何敏娟, 李征*. 往复荷载下预应力正交胶合木剪力墙抗侧力性能研究[J], 土木工程学报, 2020, 53(3), 11-18. (EI)
  46. 孙晓峰, 何敏娟*, 李征. 铁杉正交胶合木板弯曲及剪切性能[J], 建筑结构学报, https://doi.org/10.14006/j.jzjgxb.2019.0238. (EI)
  47. 何敏娟*, 罗琪, 董瀚林, 李征, 李明浩. 钢框架-轻木剪力墙混合结构抗震性能振动台试验研究[J], 建筑结构学报, 2019, 40(9), 1-9. (EI)
  48. 李征*, 王希珺, 何敏娟, 董文晨. 钢木混和墙体抗侧性能试验及钢木混合结构抗震设计方法[J], 建筑结构学报, 2018, 39(S2), 72-78. (EI)
  49. 李征*, 周睿蕊, 何敏娟, 李明浩. 震后可恢复功能木结构研究进展[J], 建筑结构学报, 2018, 39(9), 10-21. (EI)
  50. 何敏娟, 陶铎, 李征*, 章婧. 重组木框架梁柱节点力学性能试验研究[J], 东南大学学报(自然科学版), 2018, 48(6), 1013-1020. (EI)
  51. 何敏娟, 陶铎*, 李征. 多高层木及木混合结构研究进展[J]. 建筑结构学报, 2016, 37(10), 1-9. (EI)

Conference papers

  1. Hanlin Dong*, Zheng Li, Minjuan He, Qi Luo, Wenchen Dong. Experimental and numerical study on planar timber shear wall-steel frame hybrid structure with slotted-bolted dampers [C]. Proceedings of the 15th World Conference on Timber Engineering, WCTE2018, Seoul, Korea, 2018, Paper No. S230. (2018.8.20 ~ 2018.8.23) (Young scientist paper award)
  2. Zheng Li*, Xijun Wang, Minjuan He. Parametric analysis and direct displacement-based design of timber-steel hybrid structures [C]. Proceedings of the 15th World Conference on Timber Engineering, WCTE2018, Seoul, Korea, 2018, Paper No. S236. (2018.8.20 ~ 2018.8.23)
  3. Minjuan He*, Xiaofeng Sun, Zheng Li. Experimental performance of post-tensioned rocking single-panel CLT walls [C]. Proceedings of the 15th World Conference on Timber Engineering, WCTE2018, Seoul, Korea, 2018, Paper No. S218. (2018.8.20 ~ 2018.8.23)
  4. Jing Zhang, Frank Lam, Zheng Li, Minjuan He*, Yu Chen. Numerical analysis of moment-resisting bolted glulam joints with initial cracks [C]. Proceedings of the 15th World Conference on Timber Engineering, WCTE2018, Seoul, Korea, 2018, Paper No. S349. (2018.8.20 ~ 2018.8.23)
  5. Duo Tao, Minjuan He*, Zheng Li. Rotational behavior of bolted beam-to-column connections reinforced by wood knee brace [C]. Proceedings of the 15th World Conference on Timber Engineering, WCTE2018, Seoul, Korea, 2018, Paper No. S216. (2018.8.20 ~ 2018.8.23)
  6. Nicolás Bierti del Rey, Minjuan He, Zheng Li*. Mechanical behavior of novel connections for CLT [C]. Proceedings of the 2018 annual symposium of IASS, Boston, USA, 2018. (2018.7.16 ~ 2018.7.20)
  7. Qi Luo, Hanlin Dong, Zheng Li*, Minjuan He. Seismic performance of timber-steel hybrid structural system via shaking table tests [C]. Proceedings of the 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, 2018, Paper No. 10713. (2018.6.18 ~ 2018.6.21)
  8. Hanlin Dong, Zheng Li*, Qi Luo, Minjuan He. Shake table tests on large-scale hybrid steel frame and timber shear wall system with slotted-bolted friction dampers [C]. Proceedings of the 4th International Network on Timber Engineering Research, INTER2017, Kyoto, Japan, 2017, Paper No. 50-15-1. (2017.8.28 ~ 2017.8.31)
  9. Hanlin Dong, Christopoulos Constantin, Zheng Li, Minjuan He*. Damage-free seismic response of multi-story timber-steel hybrid structures with supplemental dampers [C]. Proceedings of the 16th World Conference on Earthquake Engineering, WCTE2017, Santiago, Chile, 2017, Paper No. 3428. (2017.1.9 ~ 2017.1.13)
  10. Kangli Wang, Zheng Li, Minjuan He*. Investigation into the hysteretic performance of self-centering timber beam-to-column joints [C]. Proceedings of the 14th World Conference on Timber Engineering, WCTE2016, Vienna, Austria, 2016, Paper No. PS1-03-2. (2016.8.22 ~ 2016.8.25)
  11. Minjuan He*, Zhang Jing, Zheng Li. Compressive behaviour of timber columns with longitudinal cracks [C]. Proceedings of the 14th World Conference on Timber Engineering, WCTE2016, Vienna, Austria, 2016, Paper No. PS1-06-1. (2016.8.22 ~ 2016.8.25)
  12. Zheng Li*, Minjuan He, Renle Ma. Seismic performance and probabilistic-based design of timber-steel hybrid structures [C]. Proceedings of the IASS Working Groups 12 + 18 International Colloquium "Bio-based and Bio-inspired Environmentally Compatible Structures", Tokyo, Japan, 2015, Paper No. 15T-20. (2015.4.10 ~ 2015.4.13)
  13. Frank Lam, Zheng Li*, Minjuan He, Minghao Li. Comparison of two reliability assessment methods for the seismic performance of timber-steel hybrid structures [C]. Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP12, Vancouver, Canada, 2015, Paper No. 265. (2015.7.12 ~ 2015.7.15)
  14. Minjuan He*, Duo Tao, Zheng Li. Structural performance and case studies of multistory timber/timber-hybrid buildings: review [C]. Proceedings of the 6th International Symposium on Innovation and Sustainability of Structures in Civil Engineering, ISISS2015, Beijing, China, 2015. (2015.7.26 ~ 2015.7.27)
  15. Minjuan He*, Zheng Li. Research and application of timber-steel hybrid structures [C]. Proceedings of the 13th World Conference on Timber Engineering, WCTE2014, Quebec City, Canada, 2014, Paper No. 523. (2014.8.10 ~ 2014.8.14) (EI: 20151200661170)
  16. Minjuan He*, Zheng Li. Evaluation of lateral performance of timber-steel hybrid lateral resistant system through experimental approach [C]. Proceedings of the 12th World Conference on Timber Engineering, WCTE2012, Auckland, New Zealand, 2012, 572-579. (2012.7.15 ~ 2012.7.19) (EI: 20130215891970)
  17. Zheng Li*, Minjuan He, Huiqun Liu. Lesson from the development of domestic and foreign rural timber residence [C]. Proceedings of the 2nd international conference on mechanic automation and control engineering, Inner Mongolia, China, 2011, 5886-5891. (2011.7.15 ~ 2011.7.17) (EI: 20114314454440)
  18. Zheng Li, Minjuan He*. Analysis of racking performance of steel-timber hybrid lateral resistant system [C]. Proceedings of the 52nd annual symposium of IASS, London, UK, 2011, 78. (2011.9.20 ~ 2011.9.23)

Lectures

Invited lectures

  1. Zheng Li, Invited lecture with the title of "CLT and large-scale timber constructions in china", The 5th International Timber Construction Symposium, Suwon, Korea. (2017.5.25 ~ 2017.5.26)
  2. Zheng Li, Invited lecture with the title of "Mechanical performance of self-centering glulam beam to column connections", International Workshop on Holistic Approach to Sustainable New and Existing Structures and Bridges, Fuzhou, China. (2017.7.1 ~ 2017.7.2)
  3. 李征, 特邀报告"自复位木结构及木混合结构力学性能研究", 装配式现代木结构建筑产业化发展技术研讨会, 满洲里市, 中国. (2017.7.23 ~ 2017.7.24)

Conference lectures

  1. Zheng Li participated the 15th World Conference on Timber Engineering held in Seoul, Korea, and gave the presentation of "Experimental performance of post-tensioned rocking CLT shear walls". (2018.8.20 ~ 2018.8.23)
  2. Zheng Li participated the 5th International Network on Timber Engineering Research Meeting held in Tallinn, Estonia. (2018.8.12 ~ 2018.8.16)
  3. Zheng Li participated the 2018 annual symposium of IASS held in Boston, USA, and gave the presentation of "Mechanical behavior of novel connections for CLT". (2018.7.16 ~ 2018.7.20)
  4. 李征, 大会报告"可恢复功能木及木混合结构研究", 第四届木结构新进展论坛, 西安市, 中国. (2018.3.23 ~ 2018.3.24)
  5. Zheng Li participated the 4th International Network on Timber Engineering Research Meeting held in Kyoto, Japan, and gave the presentation of "Shake table tests on large-scale hybrid steel frame and timber shear wall system with slotted-bolted friction dampers". (2017.8.28 ~ 2017.8.31)
  6. Zheng Li participated the 2017 PhD Colloquium on Timber Engineering Research held in Shanghai, China, and gave the presentation of "Seismic performance of timber-steel hybrid structures". (2017.8.22 ~ 2017.8.24)
  7. Zheng Li participated the 14th World Conference on Timber Engineering held in Vienna, Austria, and gave the presentation of "Investigation into the hysteretic performance of self-centering timber beam-to-column joints". (2016.8.22 ~ 2016.8.25)
  8. Zheng Li participated the 14th World Conference on Timber Engineering held in Vienna, Austria, and gave the presentation of "Compressive behaviour of timber columns with longitudinal cracks ". (2016.8.22 ~ 2016.8.25)
  9. Zheng Li participated the 3rd International Network on Timber Engineering Research Meeting held in Graz, Austria. (2016.8.16 ~ 2016.8.19)
  10. Zheng Li participated the 2015 PhD Colloquium on Timber Engineering Research held in Munich, Germany. (2017.8.31 ~ 2017.9.2)
  11. Zheng Li participated the 2nd International Network on Timber Engineering Research Meeting held in Šibenik, Croatia. (2015.8.24 ~ 2015.8.27)
  12. Zheng Li participated the 5th Tongji-UBC symposium on Earthquake Engineering "Facing Earthquake Challenges Together" held in Shanghai, China, and gave the presentation of "Seismic performance evaluation of timber-steel hybrid shear walls". (2015.5.4 ~ 2015.5.8)
  13. Zheng Li participated the IASS Working Groups 12 + 18 International Colloquium "Bio-based and Bio-inspired Environmentally Compatible Structures" held in Tokyo, Japan, and gave the presentation of "Seismic performance and probabilistic-based design of timber-steel hybrid structures" (2015.4.10 ~ 2015.4.13)

Patents

  1. Self-centering timber steel hybrid shear walls. NO. 201610240672.9, 2017/08/03.
  2. Timber post and beam structure with energy dissipative braces. NO. 201610503642.2, 2018/02/01.
  3. Self-centering post and beam timber connections. NO. 2015107626576. (in evaluation)
  4. Rocking dual CLT shear wall structural system. NO. 2017100651877. (in evaluation)
  5. CLT shear wall with replaceable energy dissipative feet / hold-downs. NO. 2017102603702. (in evaluation)

Code Development

  1. Committee member of national code “Technical code for prefabricated timber buildings (GB/T 51233-2016)” by Ministry of housing and urban-rural development of the People's Republic of China.

Professional Affiliations and Activities

  1. ISO Technical committee member in Timber Structures TC165
  2. Secretary and Member of National Steering Committee of Civil Engineering - Timber Structure Engineering Education in China
  3. Member of Shanghai Society of Civil Engineering
  4. Member of American Society of Civil Engineers, ASCE
  5. Member of International Association for Shell and Spatial Structures, IASS

Reviewer

    Journal of Structural Engineering ASCE; Engineering Structures; Construction and Building Materials; Canadian Journal of Civil Engineering; Structural Engineering International; Bulletin of Earthquake Engineering; Soil Dynamics and Earthquake Engineering; Journal of Earthquake Engineering; Structural Design of Tall and Special Buildings; Structural Engineering and Mechanics; Advances in Structural Engineering; Frontiers of Structural and Civil Engineering; European Journal of Wood and Wood Products; Wood Material Science and Engineering; BioResources; International Journal of Fatigue; Journal of Wood Science; Sensors; Journal of Renewable Materials; Mechanics of Materials; Earthquake Engineering and Engineering Vibration; Structures; IEEE Access; Journal of Earthquake and Tsunami; Journal of Building Engineering; Thin-Walled Structures; Measurement.

Competition Tutoring

  1. The first Shanghai university student structure design competition, second place, 2017.06.
  2. The first Shanghai university student structure design competition, third place, 2017.06.
  3. The first national university student timber structure design competition, second place, 2017.11.
  4. The ninth national university student structure design competition, third place, 2015.10.
  5. The twelfth university student structure design competition (eastern China), first place, 2015.05.